1/2Hr Strike Spring Rear Wind & Time

Stock Code:
W.00130.677000

Description

"Hermle" Mechanical

W.00130.677000 / Mechanical Clock Movement / Rear Winding Positions

Floating Balance, 8 Day, Spring Wound ( Rear Winding ), Bim Bam, Half Hour Strike Movement, Rear Striking Bell ( 46 mm Diameter )

Plate Size : 90 mm Diameter x 21 mm Between Plates
Handshaft Size : 30.5 mm
Weight : 500 Grams

Materials : Brass and Brass Plated Components, Machined Steel Parts and Nickle Plated Accessories....

Features : Polished Bridge Plate, Folding Rear Winding Keys ( Attached to Barrel Arbors ) Rear Time Adjust.

Case Requirements : The Handshaft is on the centre line of any clock ( The handshaft is not necessarily at the centre of any clock movement )
Movement Dimensions are therefore all measured from the handshaft : Down, Left, Right and Up ( including any Gong or Bell Assembly )
Depth is total depth from the tip of the Handshaft to the rear most point ( including any Gong or Bell Assembly )
The Weight Drop is Measured from the Handshaft to the Bottom of the Weight Shells after 7 Days ( Handshaft Up + Weight Drop = total length, excluding dial )

The Measurements for this Movement are :

Handshaft Down : 53.0 mm
Handshaft Left : 65.0 mm
Handshaft Right : 65.0 mm
Handshaft Up : 50.0 mm
Depth : 90.0 mm ( 75.0mm when keys are folded )
Weight Drop : Not Used on this Model

Keyhole Position : The Handshaft is on the centre line of any clock
Keyhole positions are therefore all measured from the Handshaft : Up, Down 1, Down 2 and Wide ( All Measurements are Hole Centres )
Up is to the Second Hand Feature ( Seconds ) on the Centre Line above the Handshaft * THIS MODEL DOES NOT USE A SECOND FEATURE
Down 1 is to the Time/Chime and Strike Winding Positions on the left and right of the Centre Line * MODELS WITH 2 or 3 WINDING BARRELS
Down 2 is to the Time Winding Position also on the Centre Line but below the Handshaft * MODELS WITH 3 WINDING BARRELS
Width is the distance between the Time/Chime and Strike Winding Positions ( described as Down 2 )

The Keyhole Positions for this Movement are :

Handshaft Up : Not Used on this Model
Handshaft Down 1 : 18.0 mm
Handshaft Down 2 : Not Used on this Model
Width : 50.0mm

Suits :
Handnuts E008.1202 and E008.1203
Hands HM. series ( Except HM.08400 )
Barrels B013.90322 ( Time ) & B013.90313 (Strike) Reverse Arbour

See : Other Movements in this Series
W.00130.070
W.00130.667
W.00131.080
W.00132.071

Available Stock:
5 In Stock