1/2Hr Rear Strike Spring 52cm Pendulum -Core Stock-

Stock Code:
W.00141.040052
RRP:
$594.00
Your Price:
$594.00
Stock Level:
11 Available
Make an Enquiry

Details

Description

"Hermle" Mechanical - REQUIRES SPECIAL ORDERING DUE TO PENDULUM SERIES-

W.00141.040052 / Mechanical Clock Movement

52 cm Pendulum, 14 Day, Spring Wound, Bim Bam, Half Hour Strike Movement, Rear Striking on Gong

Plate Size : 85 x 98 mm x 35.2 mm Between Plates
Handshaft Size : 33.2 mm
Weight : 500 Grams

Materials : Brass and Brass Plated Components, Machined Steel Parts and Nickle Plated Accessories....

Features : Automatic Beat,

Case Requirements : The Handshaft is on the centre line of any clock ( The handshaft is not necessarily at the centre of any clock movement )
Movement Dimensions are therefore all measured from the handshaft : Down, Left, Right and Up ( including any Gong or Bell Assembly )
Depth is total depth from the tip of the Handshaft to the rear most point ( including any Gong or Bell Assembly )
The Weight Drop is Measured from the Handshaft to the Bottom of the Weight Shells after 7 Days ( Handshaft Up + Weight Drop = total length, excluding dial )

The Measurements for this Movement are :

Handshaft Down : 51.5 mm
Handshaft Left : 55.0 mm
Handshaft Right : 55.0 mm
Handshaft Up : 60.0 mm
Depth : 105.0 mm
Weight Drop : * Not Used on this Model

Keyhole Position : The Handshaft is on the centre line of any clock
Keyhole positions are therefore all measured from the Handshaft : Up, Down 1, Down 2 and Wide ( All Measurements are Hole Centres )
Up is to the Second Hand Feature ( Seconds ) on the Centre Line above the Handshaft * THIS MODEL DOES NOT USE A SECOND FEATURE
Down 1 is to the Time/Chime and Strike Winding Positions on the left and right of the Centre Line * MODELS WITH 2 or 3 WINDING BARRELS
Down 2 is to the Time Winding Position also on the Centre Line but below the Handshaft * MODELS WITH 3 WINDING BARRELS
Width is the distance between the Time/Chime and Strike Winding Positions ( described as Down 2 )

The Keyhole Positions for this Movement are :

Handshaft Up : * Not Used on this Model
Handshaft Down 1 : 16.5 mm
Handshaft Down 2 : * Not Used on this Model
Width : 56.5mm

Suits :
Handnuts E008.1202 and E008.1203 ( smaller than W.01151 )
Hands HM. series ( Except HM.08400 for W.01171 )
Suspension Spring E021.00060
Crutch E002.06810
Pendulum PB.59 or PG.31
Barrels B013.9011 ( Time ) & B013.90100 (Strike)

Delivery Information

Large items

Freight for Floor Clocks is provided by Kent Removals.
Please call or email for a Quoted Cost and Expected Delivery Schedule. 

Permission to Return and to Receive Credit
We will accept return of merchandise ONLY IF IN SALEABLE CONDITION and notification is within 7 days of receipt .We will Issue Credit to your account or Credit Card in Australian dollars. For unwanted merchandise the cost of return shipping shall be the responsibility of the customer.

Damaged or Incorrect Merchandise
We will, upon your request, replace any merchandise that is received in damaged condition or as a result of a picking error. No material will be accepted or replacements issued without prior approval to return such merchandise. Filing of claims will be our responsibility.

You may also like...