Triple Chime Wall Mvt -43cm Gong under

Stock Code:
W.01051.020043
RRP:
$990.00
Your Price:
$990.00
Stock Level:
13 Available
Make an Enquiry

Details

Description

"Hermle" Mechanical

W.01051.020043 / Mechanical Clock Movement

43 cm Pendulum , 8 Day, Spring Wound, Triple Chime Movement, Gong Rods Underneath.
New Older Stock

Plate Size : 120 mm x 120 mm x 32 mm Between Plates
Handshaft Size : 33.1 mm
Weight : 1300 Grams

Materials : Brass and Brass Plated Components, Machined Steel Parts and Nickle Plated Accessories....

Features : Automatic Sync, Automatic Beat, Three Melody, 5 Hammers Underneath
( Sometimes available with - Second Feature, Automatic Night Shut Off )
Westminster / St Michaels / Whittington.
Eight chime hammers strike on a (8) bronze rod Gong Assembly
Chimes on 8 rods positioned to the under the movement.
Spring wound 4/4 chime
Handshaft length is 33.1mm measured from front plate to tip.

Case Requirements : The Handshaft is on the centre line of any clock ( The handshaft is not necessarily at the centre of any clock movement )
Movement Dimensions are therefore all measured from the handshaft : Down, Left, Right and Up ( including any Gong or Bell Assembly )
Depth is total depth from the tip of the Handshaft to the rear most point ( including any Gong or Bell Assembly )
The Weight Drop is Measured from the Handshaft to the Bottom of the Weight Shells after 7 Days ( Handshaft Up + Weight Drop = total length, excluding dial )

The Measurements for this Movement are :

Handshaft Down : 90.0 mm
Handshaft Left : 75.0 mm
Handshaft Right : 100.0 mm
Handshaft Up : 110.0 mm
Depth : 105.0 mm
Weight Drop : * Not Used on this Model

Keyhole Position : The Handshaft is on the centre line of any clock
Keyhole positions are therefore all measured from the Handshaft : Up, Down 1, Down 2 and Wide ( All Measurements are Hole Centres )
Up is to the Second Hand Feature ( Seconds ) on the Centre Line above the Handshaft * THIS MODEL DOES NOT USE A SECOND FEATURE
Down 1 is to the Time/Chime and Strike Winding Positions on the left and right of the Centre Line * MODELS WITH 2 or 3 WINDING BARRELS
Down 2 is to the Time Winding Position also on the Centre Line but below the Handshaft * MODELS WITH 3 WINDING BARRELS
Width is the distance between the Time/Chime and Strike Winding Positions ( described as Down 2 )

The Keyhole Positions for this Movement are :

Handshaft Up : 34.2 mm ( * Not Used on this Model)
Handshaft Down 1 : 14.0 mm
Handshaft Down 2 : 16.0 mm
Width : 93.0mm

Suits :
Handnuts E008.1202 and E008.1203 ( smaller than W.01151 )
Hands HM. series ( Except HM.08400 for W.01171 )
Suspension Spring E021.00060
Crutch E002.06810
Pendulum PB. or PG.
Gong Assembly 370 or 372
Dial 929.10R (180mm Dia), 930.10R or 932.10R (with second feature if applicable)(200mm Dia)


See : Other Movements in this Series
W.00351.02x
W.00350.02x
W.01050.02x
W.01051.02x

Select hands prefixed HM.
Movement dimensions and keyhole positions refer page 28.

Delivery Information

Large items

Freight for Floor Clocks is provided by Kent Removals.
Please call or email for a Quoted Cost and Expected Delivery Schedule. 

Permission to Return and to Receive Credit
We will accept return of merchandise ONLY IF IN SALEABLE CONDITION and notification is within 7 days of receipt .We will Issue Credit to your account or Credit Card in Australian dollars. For unwanted merchandise the cost of return shipping shall be the responsibility of the customer.

Damaged or Incorrect Merchandise
We will, upon your request, replace any merchandise that is received in damaged condition or as a result of a picking error. No material will be accepted or replacements issued without prior approval to return such merchandise. Filing of claims will be our responsibility.

You may also like...