Cuckoo 1 Day Mechanical -Auto -19cm Series
Details
Description
1 Day (Regula 25) Mechanical Cuckoo Movement.
Used as New Replacement Movement.
19.1cm Pendulum Series. Standard. (Not Usually Stamped on Rear Plate)
Will Operate Cuckoo & Rear Gong.
With Chains but no Chain Fittings.
With Auto Off Lever.
No Weights supplied.
No Hands Supplied.
Plate Size: 73 mm Wide x 68 mm High x 20 mm between plates
Weight: 240 grams (with chains)
Materials: Brass & Steel
Normally one day weight driven cuckoo clock movements come with chains, hooks and rings.
This movement uses two weights at 5/8 LBS (275 Grams).
The pendulum is the smaller one day size. Physicall length= 18cm
The pendulum series drop is the measurement from the Centre Wheel Pinion down to
the center of the pendulum leaf where the clock keeps approximate time.
Dimensions:
Plate Size is 73mm wide x 68mm high x 20mm between.
Handshaft length is 43mm fromt front plate to tip.
Handshaft centre of width and 30mm up from base.
Hour shaft tapers from 4.25mm to 4.85mm
Minute position is 2.5mm square.
Rear post is 32mm long.
4 Front mounting feet each 8mm out from front plate.
Weight Drop per Day: 160cm
See Other:
Delivery Information
Large items
Freight for Floor Clocks is provided by Kent Removals.
Please call or email for a Quoted Cost and Expected Delivery Schedule.
Permission to Return and to Receive Credit
We will accept return of merchandise ONLY IF IN SALEABLE CONDITION and notification is within 7 days of receipt .We will Issue Credit to your account or Credit Card in Australian dollars. For unwanted merchandise the cost of return shipping shall be the responsibility of the customer.
Damaged or Incorrect Merchandise
We will, upon your request, replace any merchandise that is received in damaged condition or as a result of a picking error. No material will be accepted or replacements issued without prior approval to return such merchandise. Filing of claims will be our responsibility.