Hermle Cable Passing Strike 114cm

Stock Code:
W.00791.881114
RRP:
$891.00
Your Price:
$891.00
Stock Level:
2 Available
Make an Enquiry

Details

Description

"Hermle" Mechanical - **SPECIAL ORDER**

W.00791.881114 / Mechanical Clock Movement

114 cm Pendulum, Cable Weight Wound, Hour Passing Strike Movement, Bell on Top ( 65 mm Diameter )

Plate Size : 60 mm x 181 mm x 32 mm Between Plates
Handshaft Size : 27.6 mm
Weight : 600 Grams

Materials : Brass and Polished Brass or Plated Components, Machined Stainless Steel Parts and Nickle Plated Accessories.

Features : 114cm Pendulum Series

Case Requirements : The Handshaft is on the centre line of any clock. The handshaft is not necessarily at the centre of any clock movement.
Movement Dimensions are therefore all measured from the handshaft : Down, Left, Right and Up ( including any Gong or Bell Assembly )
Depth is total depth from the tip of the Handshaft to the rear most point ( including any Gong or Bell Assembly )
The Weight Drop is Measured from the Handshaft to the Bottom of the Weight Shells after 7 Days ( Handshaft Up + Weight Drop = total length, excluding dial )

The Measurements for this Movement are :

Handshaft Down : 110.0 mm
Handshaft Left : 35.0 mm
Handshaft Right : 35.0 mm
Handshaft Up : 110.0 mm
Depth : 95.0 mm
Weight Drop : (xx)mm

Keyhole Position : The Handshaft is on the centre line of any clock
Keyhole positions are therefore all measured from the Handshaft : Up, Down 1, Down 2 and Wide ( All Measurements are Hole Centres )
Up is to the Second Hand Feature ( Seconds ) on the Centre Line above the Handshaft * THIS MODEL DOES NOT USE A SECOND FEATURE
Down 1 is to the Time/Chime and Strike Winding Positions on the left and right of the Centre Line * MODELS WITH 2 or 3 WINDING BARRELS
Down 2 is to the Time Winding Position also on the Centre Line but below the Handshaft * MODELS WITH 3 WINDING BARRELS
Width is the distance between the Time/Chime and Strike Winding Positions ( described as Down 2 )

The Keyhole Positions for this Movement are :

Handshaft Up : * Not Used on this Model
Handshaft Down 1 : 50.0 mm
Handshaft Down 2 : * Not Used on this Model
Width : * Not Used on this Model

Suits :
Handnuts E008.1202 and E008.1203
Hands HM. series ( Except HM.08400 )
Suspension Spring E021.00060
Crutch
Pendulum -Special versions / PL.33 / PA.13 / PG.39-G / PG.39-S

See :

Watch Video

Delivery Information

Large items

Freight for Floor Clocks is provided by Kent Removals.
Please call or email for a Quoted Cost and Expected Delivery Schedule. 

Permission to Return and to Receive Credit
We will accept return of merchandise ONLY IF IN SALEABLE CONDITION and notification is within 7 days of receipt .We will Issue Credit to your account or Credit Card in Australian dollars. For unwanted merchandise the cost of return shipping shall be the responsibility of the customer.

Damaged or Incorrect Merchandise
We will, upon your request, replace any merchandise that is received in damaged condition or as a result of a picking error. No material will be accepted or replacements issued without prior approval to return such merchandise. Filing of claims will be our responsibility.

You may also like...